| Model |
NS-A601 |
NS-A102 |
NS-B152 |
NS-B202 |
NS-B302 |
| Capacity |
600VA |
1000VA |
1500VA |
2000VA |
3000VA |
| Input Voltage |
110V or 220V ±25% |
| Input Frequency |
50Hz or 60Hz ±5% |
| Output Voltage |
110 / 115 / 120 / 220 / 230 / 240V ±5% ( Adjustable ) |
| Output Frequency |
50Hz or 60Hz ±0.1Hz |
| Waveform |
PWM simulated sine wave |
| Battery ( Sealed lead-acid, maintenance free ) |
12VDC |
24VDC |
48VDC |
48VDC |
48VDC |
| Back-Up Time ( for 1 PC ) |
25 min. |
40 min. |
60 min. |
90 min. |
120 min. |
| Full Load Back-Up Time |
5 min. |
5 min. |
3 min. |
4 min. |
2.5 min. |
| Protection |
When input voltage too high or too low, the UPS will supply the power automatically to protect the equipment. If output overload or short circuit, it has current limited, fuse blow or cut off protection as well as surge protection. The UPS with DC start, when AC mains black out, you can use this device to supply the output. |
| LED indicator |
Input normal (steady on), Battery mode (blinking) |
Input normal (Green), Battery mode (Green), AVR action (Orange) |
| Overload, short circuit, UPS cut off (LED off) |
UPS cut off (Orange), Overheat (Red), Battery level indicate 5 sections |
| Interface |
DB9 communication (can build software to save files and shutdown UPS) |
| Dimension W x H x D ( cm ) |
9 x 17 x 27 |
9 x 17 x 39 |
16 x 24 x 41 |
(16 x 24 x 41) x 2 |
| Weight ( KGS ) |
6.5 |
11.5 |
17.6 |
18.5 |
UPS :14
Battery :14 |
All models with AVR built-in.