CVT type power line conditioner is compact and maintenance-free. The best type of stabilizer to operate in the worst environment, there are ten major good points about CVT:
Always sinewave output.
Zero errors in the operation.
MTBF can be long up to 20~30years.
Auto current limiting can prevent the damages from output short-circuit or Over-load.
It has the best Common Mode Suppression to protect from lightning, noise, surge, spike...
The output will not be interrupted if the AC fails only within 1/2 cycle.
The output will still maintain ± 2.5% when Input voltage fluctuates drastically between ± 45%.
Rapid response time ( 1 1/2 cycle )
The output voltage can be 110V and 220V.
CVT is a super isolation transformer itself, it has the most satisfied noise filtering effect.
Specifications:
Type
CVT
AC I/P voltage range
+15% ~ -20%
AC I/P voltage surge/sag tolerance
±45%
AC O/P voltage regulation
±1% , when I/P is within +15% ~ -20%
±1.5% , when I/P voltage and the load varies at the same time
±2.5% , when I/P is within ±45% ( 3/4 load )
Fixed O/P voltage
No PC board circuit, prevent human error and causing O/P voltage deviation
Response time
1 1/2 cycle
Harmonic Distortion
3% SHD 5%THD
Common Mode Suppression
> 60db
Efficiency
> 90%
Protection
Short-circuit or Over-load, Auto current limiting ( not Auto-trip ), I/P voltage over/ Low Protection.
Environment
-20°C ~ +50°C( temperature ) .
95% ( humidity )
Application:
The CVT power line conditioner is designed to be applied with equipment which need isolation, noise-free the most. It provides the most rapid response time and is the best type of stabilizer to operate in high temperature, high moisture environmemt or areas where suffers very serious AC mains fluctuation.
